Now where to drain trans cooler line?
#1
Guest
Posts: n/a
Now where to drain trans cooler line?
Previously had log-style manifolds ('82/330/TRS/raw-water cooling, thru-hull exhaust) and just purchased a set of center-rise manifolds (GLM from MoorePerformance...quality seems high). My transmission (MercTransII) has one cooling line (in) from the oil cooler and one line out (connected to small pipe fitting on starboard riser). New risers do not have this provision. Where can I send the cooling water flow from the trans? I believe I can "t" into the main riser water fitting, but not sure if that's OK.
Many thanks in advance,
D. Ocean
Pompano Beach, FLA
Many thanks in advance,
D. Ocean
Pompano Beach, FLA
#2
Registered
Join Date: Nov 2003
Location: Fairhaven Ma
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Put a water dump out the transom or side of boat.Just did a Magnum Marine over, used Stainless Marine manifolds and sent the cooling water for the MercTrans. out thru water dump in the side of the boat. It looks cool too.
Thread
Thread Starter
Forum
Replies
Last Post
Wally
General Q & A
6
06-27-2006 08:22 AM