Gen? Roller?
03-29-2004, 01:07 PM
#1
Registered
Thread Starter
Join Date: Jan 2003
Location: Roscoe.IL
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Gen? Roller?
Can I tell without taring the engine down. On the ECM box lid: Model MCM 502 Mag EFI, Eng S/N OF 363859. Its a '95, is it a Gen V or VI. Would it have any rollers in it. I'm thinking of doing a cam change. ttfn
VIP Member
03-29-2004, 02:19 PM
#3
Registered
If it is a GenVI, it's a roller.
The timing cover on a Gen VI has only "six" cap screws instead of "ten". The timing cover is also cast aluminum instead of stamped steele. Take a look you should be able to see!
The timing cover on a Gen VI has only "six" cap screws instead of "ten". The timing cover is also cast aluminum instead of stamped steele. Take a look you should be able to see!
Thread
Thread Starter
Forum
Replies
Last Post
88Fount33
Do It Yourself, Boating on a Budget
9
10-09-2008 06:38 AM
