Powerquest 185xlt want to go faster
Powerquest 185xlt want to go faster
04-25-2004, 12:14 PM
#2
Registered
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
hey bro you found the right place.
I have the same boat, but a 1989. I am building my 3rd motor for mine.
Stock with the 270hp was 58.3 mph.
Built a 383 ...
400-410 hp took it too 70.1 mph
same 383 just a few different parts...
around 500 hp took it too 75-76 mph
New setup I am building is a small block estimated around 570 hp.
Yes and all with the alpha drive that is still living
I have the same boat, but a 1989. I am building my 3rd motor for mine.
Stock with the 270hp was 58.3 mph.
Built a 383 ...
400-410 hp took it too 70.1 mph
same 383 just a few different parts...
around 500 hp took it too 75-76 mph
New setup I am building is a small block estimated around 570 hp.
Yes and all with the alpha drive that is still living
04-25-2004, 12:18 PM
#3
Registered
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by traviss; 04-25-2004 at 12:21 PM.
04-25-2004, 07:09 PM
#4
Registered
Join Date: Jul 2003
Location: MICHIGAN
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like Traviss can help us both. I have the other 'thread' going related to small block cam selection.
I have a 19ft baron (only 150 made back in 78). I think powerquest stole the mold (very similar). Best mini offshore hull there is, only problem getting beat by little Donzi's - NO MORE
Traviss - What cam is in your motor (picture - verrrryyyy nice)?
I have a 19ft baron (only 150 made back in 78). I think powerquest stole the mold (very similar). Best mini offshore hull there is, only problem getting beat by little Donzi's - NO MORE
Traviss - What cam is in your motor (picture - verrrryyyy nice)?
04-25-2004, 07:16 PM
#5
Registered
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
last year I ran a crane hydraulic roller. 234/242 dur. .574/.595 on a 112 LSA 5500rpm max hp
The motor I am building now I just put in a crane solid roller 250/258 dur. .598/.598 lift on 112 LSA. 6000rpm max hp.
The motor I am building now I just put in a crane solid roller 250/258 dur. .598/.598 lift on 112 LSA. 6000rpm max hp.
04-25-2004, 10:49 PM
#6
Registered
Join Date: Oct 2000
Location: Eaton Rapids, Mi , USA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys, I wanted to let you all know that I have a Isky roller cam that I never ran that I would like to sell. I installed it and then plans changed so I removed it and now I do not need it. So of you know of anyone that could use it let me know. It measures 225/234 and .505/.530. Dwight
Thread
Thread Starter
Forum
Replies
Last Post
mountainmadness
Powerquest
5
04-09-2008 01:37 PM
