87 glass

I posted about my tips the other day and when I took them off the rubber exhaust hose that is between the manifold and the tip was melted on the inside. What could have causd this there is pleanty of water flowing with the exhaust. Is this a possible problem in the past or is it something I should look at .

Thanks ,JIM

Griff

How old???

If they've been on there a long, long time, they virtually grow together.

It also could have overheated at some point and the exhaust could have run dry.

87 glass

Tha hose is most likly stock from 87 and it does look like they grew together. Any suggestions on were to get good hose I can order?

JIM

cooltoys61

you can get it at Overton's.

BAD-HABIT

I would try CP Performance....

BH

97BossHammer

Or you could try a local shop. I got mine locally from a rubber shop. Just call around and ask if they carry marine exhaust, you'll usually find it, and at a good bit cheaper then other places.

Danny_Ocean

I have a 28" section of 4" w/wire, brand new, left over from my recent exhaust changeover. Hate to throw it away...will donate to the cause if you pay shipping.

Lemme no,

D. Ocean
Pompano Beach, FLA
[email protected]

87 glass

Danny, That is awsome of you to offer I have 3" tips and I dont think it will work unless you have an idea to make it work.Again thank you for the offer nice to know there are good people out there!


Thanks, JIM

BajaBuddy

You can get reducers, but might be cheaper to get smaller hose.

Danny_Ocean

Reducers will work, but that's one more thing to leak/rust and look like crap.

Why ain't you upgradin' to 4"? That's what I did...

???

D. Ocean
Pompano Beach, FLA