k plane hydraulic line replacement
06-02-2004, 07:10 PM
#1
Registered
Thread Starter
Join Date: Jan 2004
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
k plane hydraulic line replacement
On a Sonic 31 the lines that crossed over the trim pump lines from the kplane
lines had a short .When they shorted the lines to the kplane burned a hole
in one or both lines . We need to know how to replace the lines .
do you pull through the kplane ? I can not reach the inside of the hull
on the back side of the kplane . The short was caused from the stainless steel
touching the positive terminal on trim pump. This is a new boat ,the dealer is 5 hrs away.
lines had a short .When they shorted the lines to the kplane burned a hole
in one or both lines . We need to know how to replace the lines .
do you pull through the kplane ? I can not reach the inside of the hull
on the back side of the kplane . The short was caused from the stainless steel
touching the positive terminal on trim pump. This is a new boat ,the dealer is 5 hrs away.
