K-Plane Hydraulic Question
08-03-2004, 05:55 PM
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
K-Plane Hydraulic Question
Am getting near the end of recovery from severe electrolysis damage and of course another one has come out of the wood-work--
Haven't got K-Plane hydraulics hooked back up yet but mechanic is saying that since they seem "frozen" in place with lines disconnected there must be bad cylinders--more damage from electrolysis.
On older K-Planes (1987) are the cylinders valved to prevent motion unless pump operates them--or in fact are mine really seized and need replaced?
Poorsche
www.boatmat.com
Haven't got K-Plane hydraulics hooked back up yet but mechanic is saying that since they seem "frozen" in place with lines disconnected there must be bad cylinders--more damage from electrolysis.
On older K-Planes (1987) are the cylinders valved to prevent motion unless pump operates them--or in fact are mine really seized and need replaced?
Poorsche
www.boatmat.com
