Solution for Head Gasket troubles- Blown or N/A
#1
Registered
Thread Starter
Solution for Head Gasket troubles- Blown or N/A
The final solution to leaky head gaskets in High Compression or Blown engines is here!! The new NASCAR Stainless Multi-layer (3) head gaskets by Federal Mogul.
Go to :http://www.federal-mogul.com/cda/cha...2_7106,00.html
Available thru Fel-Pro dealers.
The only problem is cost- about $180-200.00 a pair!! even so, it's cheap by comparison changing gaskets & pulling engines.
Go to :http://www.federal-mogul.com/cda/cha...2_7106,00.html
Available thru Fel-Pro dealers.
The only problem is cost- about $180-200.00 a pair!! even so, it's cheap by comparison changing gaskets & pulling engines.
#2
Registered
Join Date: Jan 2003
Location: Broken Arrow, OK
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Re: Solution for Head Gasket troubles- Blown or N/A
Very nice. Looks just like these Cometic gaskets. Cometic has a standard coated outer layer and the center "shim" layer makes the total thickness.
#5
VIP Member
iTrader: (1)
Re: Solution for Head Gasket troubles- Blown or N/A
A big help is to also use ARP head bolts or if you have the room,ARP studs.
Studs have the best clamping force.
Studs have the best clamping force.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com