CMI braided hose question
09-09-2004, 11:25 AM
#1
Charter Member #139 /Moderator/Platinum Member
Charter MemberThread Starter
Join Date: Nov 2000
Location: McHenry IL /Duck Key FL
Posts: 2,201
Likes: 0
Received 0 Likes
on
0 Posts
CMI braided hose question
the id of #16 hose is .88 will this fit over the 1" bung on the CMI header?
I measure the hose on the stock 500 hp stufff and it measured 1" id cant find this in braided I would like to use the good stuff and not use the covers
I measure the hose on the stock 500 hp stufff and it measured 1" id cant find this in braided I would like to use the good stuff and not use the covers
Last edited by klaw; 09-09-2004 at 11:26 AM. Reason: typo
09-09-2004, 03:16 PM
#3
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: CMI braided hose question
It's not high pressure, even merc uses covers for thiers. You'll have to use a cover style hose clamp end anyway. Either use covers, or weld in an S/S JIC fitting, or weld a bung to tap and use a NPT to JIC fitting on the header.
Just my $0.02.
Gary
Just my $0.02.
Gary
09-09-2004, 04:32 PM
#4
Registered
Join Date: Oct 2000
Location: Prospect, Ky
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Re: CMI braided hose question
Originally Posted by klaw
the id of #16 hose is .88 will this fit over the 1" bung on the CMI header?
I measure the hose on the stock 500 hp stufff and it measured 1" id cant find this in braided I would like to use the good stuff and not use the covers
I measure the hose on the stock 500 hp stufff and it measured 1" id cant find this in braided I would like to use the good stuff and not use the covers
