Prop Manufacture ID
#4
Registered
Re: Prop Manufacture ID
If Hydromotive lab finished the prop you would be able to tell. On the can between a couple blades there would be a stamp with a series of letters and numbers. The first two letters would be "HE" followed by a series of numbers.
If another shop worked the prop then it's up to the individual shop as to how they mark a prop. Generally a lab finished prop would have a thin leading edge. It may have either a satin or polish finish.
If another shop worked the prop then it's up to the individual shop as to how they mark a prop. Generally a lab finished prop would have a thin leading edge. It may have either a satin or polish finish.
Thread
Thread Starter
Forum
Replies
Last Post
never enuff
Do It Yourself, Boating on a Budget
2
07-24-2008 07:21 AM