Marinize 496 truck engine
#2
Platinum Member
Platinum Member
Re: Marinize 496 truck engine
brass freeze plugs.
stainless matrix headgaskets.
proper marine cam (114-115 degrees of lobe separation).
That's the short list.
I assume you will be using marine external components from a tired marine motor (carb, ignition, fuel pump, starter, alternator, circ pump, thermostat housing, plumbing) - if you weren't planning on that, then add that to it.
stainless matrix headgaskets.
proper marine cam (114-115 degrees of lobe separation).
That's the short list.
I assume you will be using marine external components from a tired marine motor (carb, ignition, fuel pump, starter, alternator, circ pump, thermostat housing, plumbing) - if you weren't planning on that, then add that to it.
#4
Registered
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Marinize 496 truck engine
A marine water pump (engine recirc) especially if running in salt water should be on list--and of course all USCG approved seal on electricla stuff--
#5
Registered
Join Date: Nov 2002
Location: Milford CT.
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: Marinize 496 truck engine
I,m doing the same project , The 496 is a odd engine not the same as the 502 or 454 everything is different .Has far has the cost the cam set 600 to a 1000 depending on the company have not priced the gasket set yet but the stock set that was on the engine is okay for salt water use. (coded) The crank is a forged in a truck vs a steel in the marine engine . The ecu to run the engine is going to be costly not sure if a 454 or 502 ecu will run tis engine they changed the firing order on this beast., I have been trying to locate a throttle body and fuel rails for mine, but so far no luck. I been talking with a few people about running a carb .setup but no one has any info on this subject. The balancer and flywheel and fuel pump system also need to be changed. Email me about the details and progress your making . Jeff
#6
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Re: Marinize 496 truck engine
Jeff:
Call us toll free (866) 496-8181 we can help you with most all your 496 needs, fuel rails, throttlebodies, etc.etc., as well as performance upgrades for the motor.
Raylar
Call us toll free (866) 496-8181 we can help you with most all your 496 needs, fuel rails, throttlebodies, etc.etc., as well as performance upgrades for the motor.
Raylar
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
23
12-10-2007 05:23 PM