Excalibur

What drive will hold up to 700 plus horsepower with a mild hole shot, that doesn't cost 30,000 plus? Tired of babying my toy. It's easy to make power but the marine industry seems a little behind in technology compared to cost. Maybe, sell the boat and but outboard engines.

38KV

Konrad

dykstra

iTrader: (1)

konrad

articfriends

iTrader: (1)

I have gotten reasonable use out of max machine worx drives

Panther

Does anyone make upgraded gears? It seems all the aftermarket companies are using the XR gearset's

articfriends

iTrader: (1)

Panther,all the upgraded bravo's are still using xr gears,other than some issues with some soft pinion gears at first ,the xr upper gears (if supported right with good bearings etc) seem to outlast other parts exploding/breaking in outdrive,Smitty

Excalibur

How hard can you launch the boat from a stand still? And what if you boost the power up to 1,000 horses?

Excalibur

Also is it a shiftable drive or does it require a transmission. I do not have enough engine bay to move the motor forward.

Stormrider

What do you have there now?

The Konrads are good for 700hp.
They make a standoff box to house the tranny, mounts right where a bravo was.
Cost of the whole package is about $13,000.

f311fr1

Check with Total Marine & Performance on their upgraded Bravo's. I ran 1989 model Bravo 1 behind 600 HP blown 468's for 10 years. NO hole shots ever.