Tempest38

Have a chance to get a couple of SSM II drives and my 38' boat now has TRS. The SSM's have 1:33 gears and I'm not sure what the TRS' have. Would it be worth changing and what could I expect both Pro and Con?
Thanks!!!!!!!

Lofty

You're going to go from hard to get parts to impossible to get parts. They'll look sweet though.

Biggus

iTrader: (1)

The Speedy II is about 2" longer than your TRS. The propshaft will then be too deep.

Also, there are no parts available for the Speemaster II. No gears, propshafts nothing.

You want to increase perfomance, bolt on a pair of Konrad 540's (they are 1.6"shorter than your TRS)

Kurt

LarryD

save your money the #2 are the same upper ( basically ) with speedy lowers . the whole thing not really any stronger than a bravo try KONRAD drives I am pretty sure the bolt on a trs gimble and are alot stronger

Tempest38

I can take a hint. Think I'll skip them. Ofcourse the Konrads are a ways off. Haven't had TRS troubles yet but since the II's were available thought I'd check in to it.
Thanks Guys!!!

ratman

tommy @ chief engines has a complete pair of ssm3a's i think he wants 10 k for a complete pair with everything you need give him a call only thing stouter i think is the number 6 drives. just my .02 ratman