Leathl_WS6

Looking for 2 complete harnesses. I need everything including the breaker setup and mounting bracket. Any idea where I can buy these complete? Mercruiser wants to sell me each part seperatly.

I'm switching from efi to carb. They are 502 engines and I will be running thunderbolt 4 ignition. I have the harnesses for the ignition already.

Any help would be great

Rob

jdnca1

EBAY....They're on there frequently. CP Performance, BAM, etc, etc....

Leathl_WS6

Thanks I have been watching Ebay for a month now not one has been listed. I'll check CP.

Rob

formula31

Try this guy too.

http://www.boatworksofohio.com/

44MTI

I bought a couple from teague last yr, very reasonable. About $100 bucks each,I bought the ones for 900SC and they were cheaper than some of the other for some reason.

formula31

Use mercruser and wiring as your seach.

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

cdog

I have one in great condition, It was for a V-6 but will work just fine for a v-8. All the wires are the same. PM me if you want it. I'll let it go for real cheap.

Ed

Don't know if you need the "keyswitch harness's" or not, but they are the same whether you have a carb or efi motor. These are the harness's that run from the dash back to the motor...and then plug into the engine harness. The keyswitch harness's are the same for every Mercruiser V-8 inboard or sterndrive, regardless of size. Ed

Leathl_WS6

Cdog I tried to send you a PM but it said you can't receive them.

Anyhow is it complete with the breaker assembly? How much. Let me know you can call me at 440-315-5733

Leathl_WS6

I saw that one but I need the motor Harness. I do seach those keywords. I have also just seached wiring harness and weed through them all.

Rob