Land & Sea Model 600 Hydro Electric Transon Jack
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: Destin, FL
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Land & Sea Model 600 Hydro Electric Transon Jack
A friend of mine is trying to rebuild the hydraulic pump on his L&S Jack Plate. L&S has no info to give him. Anyone know what the pump is and where he could find an assembly diagram for it? Thanks for the help.
Shawn
Shawn
#2
~~~~
Charter Member
#4
Charter Member #232
Charter Member
Re: Land & Sea Model 600 Hydro Electric Transon Jack
You can use a regular Merc trim pump on those if you have any or can buy one. Or is this the one that has the entire system all in the bracket? If it is all in the bracket we swapped out the ram on one and put the trim pump in the boat. I can try and find out what piston we used if you are interested.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
Registered
Thread Starter
Join Date: Oct 2002
Location: Destin, FL
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Re: Land & Sea Model 600 Hydro Electric Transon Jack
Thanks Jon, this is one of the self contained units with everything on the jack plate. Any recommendations you might have would be great. Thanks.
Shawn
Shawn
#6
Registered
Join Date: Oct 2001
Location: brookfield ,wi
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: Land & Sea Model 600 Hydro Electric Transon Jack
They used 2 different types of OMC outboard trim pumps.Some parts are available through OMC depending on which pump. I went to a local hydraulic shop and matched most of the o-rings when I rebuilt mine.
Thread
Thread Starter
Forum
Replies
Last Post
SUPER AIR
General Boating Discussion
10
08-24-2006 06:47 AM
Chris288
General Boating Discussion
0
06-23-2004 01:54 PM