Low Mount Alt. & P/S Pump Location
#1
Emerald Coast of Florida
Gold Member
Thread Starter
Join Date: May 2004
Location: Navarre FL
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Low Mount Alt. & P/S Pump Location
Any ideas on mounting brackets for the Alternator and P/S pump. Motor is BBC (Dart block, single engine) with CMI's. The stock brackets hit the headers. I've found the low mount alternator bracket, but who makes a power steering pump bracket that will relocate the pump and/or where to relocate the pump. The motor will be running "V" belts, and the stock Merc sea water pump in stock location.
Thanks-
Chris
Thanks-
Chris
#2
Charter Member
Charter Member
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
Re: Low Mount Alt. & P/S Pump Location
Do the brackets hit the CMIs or just the PS pump? I run the v-belts with my CMIs and used a shorter PS belt to move the PS pump.
I think IMCO has something that might work.
http://www.imcomarine.com/pages/performance.html
I would try Trick Marine or CP Performance as they are advertisers here.
I think IMCO has something that might work.
http://www.imcomarine.com/pages/performance.html
I would try Trick Marine or CP Performance as they are advertisers here.
Last edited by rbtnt; 12-27-2004 at 08:36 PM.
#3
Emerald Coast of Florida
Gold Member
Thread Starter
Join Date: May 2004
Location: Navarre FL
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Re: Low Mount Alt. & P/S Pump Location
Stock Merc bracket causes the alt. to hit the headers and the water feeds. I looked at the IMCO bracket for the alt. but they don't make one to reposition the P/S pump. The P/S pump is a Saginaw.