rev limiter on hp500
01-16-2005, 09:04 PM
#3
Charter Member # 55
Charter Member
Re: rev limiter on hp500
Thunderbolt IV ?????? or V ???
The rev limiter is a separate component on TB IV's and not built into the module. It may or may not be included with what you're looking at. It would be at 5300-5350rpms.
The rev limiter is a separate component on TB IV's and not built into the module. It may or may not be included with what you're looking at. It would be at 5300-5350rpms.
01-17-2005, 12:40 AM
#5
Charter Member # 55
Charter Member
Re: rev limiter on hp500
Its a TB IV and The limiter looks like a factory Merc one. Should be 5300-5350rpms. You don't have to hook it up at all if you don't want. If it came off a 500HP, then it has a 20* advance module.
my frend posted this for me, its perf. built new 540s and wanted 6200 rpm plus.this is how it is i buy high and sell cheep isent this how it works
01-26-2005, 09:56 AM
#10
Registered
Thread Starter
Join Date: Jul 2001
Location: Rockford, IL
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Re: rev limiter on hp500
it seems to be wired in pretty direct, does anyone have a tip on removal of this setup.....doesnt seem to jsut unplug.....ill have to cut and splice if thats the case.
doesnt the part number indicate a 23* advance??? is there anyone to contact to find out exactly what it is?
doesnt the part number indicate a 23* advance??? is there anyone to contact to find out exactly what it is?
