Prater

I am looking for 4 of the rubber bushings that attach the bravo flywheel housing to the inner transom plate. Anyone have them laying around or know a good source. mercruiserparts.com states they are no longer available.

Two 454 Flywheels(assuming an automotive flywheel will not work)

Also looking for two metal dust covers for the flywheel housing.

Thanks

Strip Poker 388

iTrader: (6)

Try Donnie at Offshore Performance marine at 239-489-0884

2112

Just bought two sets at the corner Merc dealer. They are taller than the old ones but otherwase the same. May have a new part number.

Do you need an entire bellhousing? I have an extra brand new one I'd sell.

PM me if so.

Mbam

There is a replacment kit, elimimates the use of the old spring washers, you need 1 kit per engine. Part number is 865329A02, we sell them online for $29.53 per kit (and have them on the shelf).

Edward R. Cozzi

Try Castaline Marine. He has an impressive inventory and will ship overnight.
(954) 966-0240 or fax:
(954) 966-3050

Papache

I have two bbc fly wheels used but they are steel an one bravo coupling $250 for all email kid [email protected]

Prater

Thanks, I sent some PM's and emails. Marc, I will make an online order for the parts I need next week. Thanks

Mbam

Sorry, I gave the wrong part number before, 865330A02, will post a picture of the kit in a few.

Strip Poker 388

iTrader: (6)

MBam what is the purpose of the spring and fiber washer??????????

This new kit sounds like something to upgrade to.

Mbam

The spring gave the rear of the engine some "give", but usually wound up collapsed anyhow. The new mount (used on all the new engines) is taller and eliminates the spring washer.