Dyno sheet from Mesa
#1
Registered
Thread Starter
Dyno sheet from Mesa
Here is my dyno sheet from My 572 ci 700hp n/a motors that Las Mesa is building for me to go into my 2000 Tiger.
I m not a motor head, so I figured Id post the results and let the experts here post there comments
RPM HP TORQUE
3040 375.0 647.8
3114 391.8 650.7
3201 417.0 684.3
3301 457.9 728.6
3410 471.3 725.9
3507 470.9 705.2
3604 478.7 697.5
3712 488.8 691.6
3809 492.1 678.6
4005 511.8 671.1
4116 524.9 669.7
4205 538.0 672.0
4313 558.4 679.9
4402 578.0 689.6
4517 597.7 694.9
4602 609.9 696.0
4702 620.8 693.4
4803 634.8 694.1
4903 656.3 703.0
5008 674.1 707.0
5112 691.6 710.5
5208 698.9 704.8
5307 712.8 705.4
5409 723.3 702.3
5501 726.3 693.4
5603 716.7 671.8
5704 713.1 656.6
5801 711.9 644.5
5904 711.3 632.8
Las is going to set the rev limiter at 5600. I am using Throttle up and plan on using a 5 blade Hydromotive px to run at 52-5400 rpms max
Tell me what you guys think. Good ,bad ??
I m not a motor head, so I figured Id post the results and let the experts here post there comments
RPM HP TORQUE
3040 375.0 647.8
3114 391.8 650.7
3201 417.0 684.3
3301 457.9 728.6
3410 471.3 725.9
3507 470.9 705.2
3604 478.7 697.5
3712 488.8 691.6
3809 492.1 678.6
4005 511.8 671.1
4116 524.9 669.7
4205 538.0 672.0
4313 558.4 679.9
4402 578.0 689.6
4517 597.7 694.9
4602 609.9 696.0
4702 620.8 693.4
4803 634.8 694.1
4903 656.3 703.0
5008 674.1 707.0
5112 691.6 710.5
5208 698.9 704.8
5307 712.8 705.4
5409 723.3 702.3
5501 726.3 693.4
5603 716.7 671.8
5704 713.1 656.6
5801 711.9 644.5
5904 711.3 632.8
Las is going to set the rev limiter at 5600. I am using Throttle up and plan on using a 5 blade Hydromotive px to run at 52-5400 rpms max
Tell me what you guys think. Good ,bad ??
#3
Registered
Thread Starter
Re: Dyno sheet from Mesa
Originally Posted by PSCHENCK
Great numbers, what fuel did they run? I would turn em a lttle tighter 5,400- 5,600 with a 5,800 limit.
#4
Registered
Thread Starter
Re: Dyno sheet from Mesa
Originally Posted by Too Old
The numbers look great. That's big horsepower.
Thanks Fred. I expect the Dana exhaust to show up tomarrow at the shop. Cant wait. They anticipate running the boat on Saturday in Miami
#5
Charter Member #34
Charter Member
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
Re: Dyno sheet from Mesa
Otis,
Those are very good numbers.
I just built my 500EFI's and it is quit interesting the comparision. I sent you a PM, check it out.
Look forward to meeting you at the FBC Miami Boat Show Poker Run.
Doc
Those are very good numbers.
I just built my 500EFI's and it is quit interesting the comparision. I sent you a PM, check it out.
Look forward to meeting you at the FBC Miami Boat Show Poker Run.
Doc
#6
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Saratoga Springs, N.Y.
Posts: 2,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno sheet from Mesa
Congrats Bob!!!! You must be really excited for the upcoming season. Have you figured out when your going to arrive in Miami yet? We will be there from Wed noon thru Monday evening.
#7
Re: Dyno sheet from Mesa
Otis, I like what I'm seeing from Mr. Mesa. Because I'm male, I am told that I am very visual so therefore I need pic's. I would also like your opinion of the P-5's. Doug
#8
Registered
Thread Starter
Re: Dyno sheet from Mesa
Originally Posted by outriggers
Otis, I like what I'm seeing from Mr. Mesa. Because I'm male, I am told that I am very visual so therefore I need pic's. I would also like your opinion of the P-5's. Doug
Pictures will have to come from Las. BTW, Im a male too. WTF does that have to do with anything. You aint hitting on me are you ??? lmao
As far as the P-5'S go. Ill answer that ?? in a few days once I get down there and run the boat
#9
Registered
Thread Starter
Re: Dyno sheet from Mesa
Originally Posted by Chuck
Congrats Bob!!!! You must be really excited for the upcoming season. Have you figured out when your going to arrive in Miami yet? We will be there from Wed noon thru Monday evening.
Chuck, Im flying down for a few days next week. Then Im coming home and driving back down on the 21st for 10 days. Ive got to drive back home Just in time to a catch a plane to the Bahamas for a week
Looks like are paths wont cross in Florida unless I hold off until Wednesday and Thursday to fly down and run the boat
#10
Re: Dyno sheet from Mesa
[QUOTE=otis311]Pictures will have to come from Las. BTW, Im a male too. WTF does that have to do with anything. You aint hitting on me are you ??? lmao
No, I think I've spent to much time around women telling me why I do things? Doug
No, I think I've spent to much time around women telling me why I do things? Doug