Scarab28

What's the right way to seal a B1 Gimbal housing to the transom. Is there a trick to mounting that large round rubber
gasket?

WILDTHING TAZ

Clean Off Old Seal. I Used A Few Drops Of Supper Glue Around Housing To Hold The Seal In Place So You Can Mount It To Transom. It Worked Very Well For Me. Im Sure Their Our Some Other Ways. That's Just What Worked For Me.

fourplaydave69

Ron, I was told to use 3-M adhesive. It worked for me. David

WILDTHING TAZ

I Tried The Spray. It Wouldn't Stick For Me And Made A Mess. But Im Always In A Hurry And That Doesn't Help

WILDTHING TAZ

HEY DAVE BY THE WAY EASTSIDE'S RUN I HEAR IS JULY 16th. IS YOUR NEW MOTOR GOING TO BE IN & RUNNING BY THEN ?

fourplaydave69

Ron, I am having a new motor done for the 27 fountain so I can sell it. I bought a 35 lightning in Jan. Need to get one built for it. If I am boatless I will bring the Ski- Eliminator!!!! Dale said the 500 will be done in a week or two. David