93 28' redline cat resto
#1
Registered
Thread Starter
Join Date: Feb 2004
Location: nashville,Tennessee
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
93 28' redline cat resto
Off shore racers I have some rigging questions.
Should I use 20" or 15" shafts & housings.
I am having a composite transome and floor istalled.
They are cutting the transome down 5"s from the splashwell.
Here are a few pictures of the transome and restoration of the boat.
I already have the 20" mids from old set up.
The motors were bolted to the transome before with 25" shafts.
I have bought CMC 5-1/2 manual aluminum jackplates to get prop shaft in the right position.
Thanks for the help.
Should I use 20" or 15" shafts & housings.
I am having a composite transome and floor istalled.
They are cutting the transome down 5"s from the splashwell.
Here are a few pictures of the transome and restoration of the boat.
I already have the 20" mids from old set up.
The motors were bolted to the transome before with 25" shafts.
I have bought CMC 5-1/2 manual aluminum jackplates to get prop shaft in the right position.
Thanks for the help.
#2
Re: 93 28' redline cat resto
I could be wrong but isn't the redline mold now being used by Profile? If so, I know that they have build some O/B 28's and they might be able to help.
http://www.profilepowerboats.com/28cat.shtml
http://www.profilepowerboats.com/28cat.shtml
Last edited by FASTTIMES; 03-31-2005 at 12:48 PM.
#3
Registered
Thread Starter
Join Date: Feb 2004
Location: nashville,Tennessee
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 28' redline cat resto
Originally Posted by tc-outlaw
I could be wrong but isn't the redline mold now being used by Profile? If so, I know that they have build some O/B 28's and they might be able to help.
http://www.profilepowerboats.com/28cat.shtml
http://www.profilepowerboats.com/28cat.shtml
Mine has been 102 with the 25" shafts.
What the morors to sit lower on the boat.