32 awesome thundercat
12-09-2006, 07:44 PM
#1
JBBEARD
Gold MemberThread Starter
Join Date: Jan 2004
Location: little rock, AR
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
32 awesome thundercat
Hi all Awesome owners. Have finally gotten my boat toghether in Houston TX. will finish paint next month and be ready for spring fun!
Complete rebuild including new engines, (540 blower 850 hp) drives ( imco extreme) new controls and gauges (lavorsi) , wiring and electronics! Hope to water test next week if temp is 70 or better. will advise results and post photos soon. Any advice on props will be appreciated. will run the first time with the 30 pitch 4 blades bravos I had with the old drives then plan to get 5 or 6 blade props to improve performance and control- thanks for any advice- James
Complete rebuild including new engines, (540 blower 850 hp) drives ( imco extreme) new controls and gauges (lavorsi) , wiring and electronics! Hope to water test next week if temp is 70 or better. will advise results and post photos soon. Any advice on props will be appreciated. will run the first time with the 30 pitch 4 blades bravos I had with the old drives then plan to get 5 or 6 blade props to improve performance and control- thanks for any advice- James
12-10-2006, 05:01 PM
#2
Registered
iTrader: (2)
Join Date: Jan 2003
Location: Lawrenceburg, Indiana
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Re: 32 awesome thundercat
how high is your x dimension? gear ratio? spinning in or out? Boxes? I know of several running very well and may be able to help.
Platinum Member
12-11-2006, 06:41 PM
#5
JBBEARD
Gold MemberThread Starter
Join Date: Jan 2004
Location: little rock, AR
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Re: 32 awesome thundercat
I have not changed the x demention, it is factory standard bravo and the gear ratio is 1:36 but I have added the imco 12" extention boxes and will not have any reference info untill after my first run using the bravo 30" props I have-
