Winter projects for the boat, lets see em'
12-13-2006, 04:54 PM
#1
Registered
VIP MemberThread Starter
Winter projects for the boat, lets see em'
I am new to all this and recently bought a 36 OL from a member of the OSO. I have decided to update the cabin carpet to grey like on the newer models and loose some of the purple. I hope to have it all removed over this weekend and reinstalled by the following. I'm having the deck carpet redone in purple. I'll post some pics when I get started. Anyone else starting any projects? 
12-13-2006, 05:16 PM
#2
Registered
Join Date: May 2006
Location: Baton Rouge
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
I am wrapping up my winter project…. Motors, Paint, and Interior are now finished now all I have left is to put my new gauges in and paint the dash and glove box and a few other panels. Put my new platform on witch should be this week and put my rub rail on, Stereo and this project will be done. It will be completed real soon. I am ready.
Last edited by dogghouse; 09-03-2007 at 10:12 AM.
12-13-2006, 05:51 PM
#3
Registered
Join Date: Nov 2006
Location: Naples, FL
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
Winter Project #1: Take to boat out as much as possible
Winter Project #2: Install our new GPS then go back to Winter Project #1
Winter Project #2: Install our new GPS then go back to Winter Project #1
12-13-2006, 07:38 PM
#4
Registered
Join Date: Mar 2006
Location: Northern Va
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
I am finally putting the new 496ho in my 27' Islander and putting on a new Imco dual ram full hydraulic steering system. Should be done sometime around spring! 
Business has been to busy to put more than a hour here or there. I guess that’s a good thing!
Lt.
Business has been to busy to put more than a hour here or there. I guess that’s a good thing!
Lt.
12-13-2006, 08:07 PM
#5
Re: Winter projects for the boat, lets see em'
I was just going to pull starboard engine to remove y-pipe and change out the bilge pump. But after the compression test I will be pulling both engines. The port engine had two bad cylinders. All of which was caused by the engine builder with out a doubt this time. Looks like I will be able to re-rig the engine compartment while they are out.
Also plan on making the rear bench seat into a triple bolster seat.
Just finished the trailer improvement package, which included diamond plate front, front boarding ladder, new tool boxes, and 8 star aluminum wheels.
Looks like it will be another expensive winter.
Also plan on making the rear bench seat into a triple bolster seat.
Just finished the trailer improvement package, which included diamond plate front, front boarding ladder, new tool boxes, and 8 star aluminum wheels.
Looks like it will be another expensive winter.
12-13-2006, 09:04 PM
#6
www.Bajaboatowners.com
Platinum Member
Join Date: May 2005
Location: Knoxville TN
Posts: 903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
Looks like I will be able to re-rig the engine compartment while they are out.
Just finished the trailer improvement package, which included diamond plate front, front boarding ladder, new tool boxes, and 8 star aluminum wheels.
12-13-2006, 09:07 PM
#7
Registered
Join Date: Sep 2002
Location: Ft Worth Tx
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
Originally Posted by Steel Outlawed
I was just going to pull starboard engine to remove y-pipe and change out the bilge pump. But after the compression test I will be pulling both engines. The port engine had two bad cylinders. All of which was caused by the engine builder with out a doubt this time. Looks like I will be able to re-rig the engine compartment while they are out.
Also plan on making the rear bench seat into a triple bolster seat.
Just finished the trailer improvement package, which included diamond plate front, front boarding ladder, new tool boxes, and 8 star aluminum wheels.
Looks like it will be another expensive winter.
Also plan on making the rear bench seat into a triple bolster seat.
Just finished the trailer improvement package, which included diamond plate front, front boarding ladder, new tool boxes, and 8 star aluminum wheels.
Looks like it will be another expensive winter.
Steel, isnt that the motor that already gave you problems or is this the other one??? Sorry to hear about your engine problems
12-13-2006, 10:10 PM
#9
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: Winter projects for the boat, lets see em'
Add bulkheads to ware the back seat was, one under the dash where the plexiglass was and a rim one whereseats end in the cabin. and finish with the inside hyd steering, maybe floors to, new brakes on the trailer disk, new back seat. then go race in opa this spring if my knee is done. the surgery 6 weeks ago did't work 
I told them.
the surgery 6 weeks ago did't work I told them.
