Baja dash panels
#4
Registered
Thread Starter
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
Didn't know Brian made the dash panels for Baja? Checked with him about a year ago and about 3 weeks ago and seems everything he has I already own.
Last edited by Irishtornado; 03-02-2008 at 09:16 PM.
#5
Registered
Thread Starter
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
I think its some type of vinyl material put over the top of aluminum I do know of a couple companies that do the carbon fiber, but was more looking for the company that makes it for Baja I'll let you know what I find out though.
#6
Registered
Join Date: May 2005
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Brian has some of the Dark Panels for Baja Boats. Last I talked to Him atleast
#7
Registered
My pic with the GPS is from Mikebris's 35OL. It came with my dash look. The dealer installed the GPS unit for him. He said Baja sold the dealer the blank panel--Not sure if they drilled the holes. Then a local shop painted the look and then the dealer installed it.
This was for his brand new 35OL. Dealers dont usually like to deal with items like this for non local folks.
I would take a blank from Baja and drill my own holes. I doubt BAJA would sell the blank. They cant say its dated because it still is utilized in the 35OL today.
This was for his brand new 35OL. Dealers dont usually like to deal with items like this for non local folks.
I would take a blank from Baja and drill my own holes. I doubt BAJA would sell the blank. They cant say its dated because it still is utilized in the 35OL today.
#9
Registered
Thread Starter
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
I'll know more in a couple days Bowtye8 I'm working on it with Customer service once I find out who makes them I'll let you know. I'm sure the 35OL you can get the blank for I'm trying to have mine covered I already have the panels cut just need the company that puts the carbon fiber on them.