Frozen swim platform
#1
Registered
Thread Starter
Frozen swim platform
When I pulled the boat out of the shop in January I found that the platform froze and broke a weld on the platform. Anyone had this happen? I didn't know I had to winterize the platform. The dealer tells me they are going to install a new tube and repaint it. My complaint is that the thing came powdercoated from the factory, is the paint going to stay on it?
#2
Registered
Join Date: Oct 2002
Location: Indianapolis, IN
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
I would have them replace it.
A few years ago they were having problems with corrosion from the inside on some platforms, the water coming in through the drain holes in the tubes.
So they stopped putting drain holes in them. My platform has been replaced by the factory--no holes.
A few years ago they were having problems with corrosion from the inside on some platforms, the water coming in through the drain holes in the tubes.
So they stopped putting drain holes in them. My platform has been replaced by the factory--no holes.
#4
VIP Member
VIP Member
I've heard of it happening a couple of times.