Bomar Hatch Trim???

[Irishtornado]

Originally Posted by jfm

Is this one of them Dave? http://cgi.ebay.com/ebaymotors/BOMAR...ht_1755wt_1167

Same design, but different hatch. I'm guessing that hatch was used on the 335

[XT-Innovator]

Originally Posted by irishtornado

Same design, but different hatch. I'm guessing that hatch was used on the 335

Come-on, your both wrong on this one! That is the Baja 342 hatch, but it was also used on the 442, and late model 320's.

The 302 hatch is the same as the rear set of 38 Special hatches, and the 335 is the same as the 275, and 405. The 278 was a new design, but not many were produced.

XT

[Irishtornado]

Originally Posted by XT-Innovator

Come-on, your both wrong on this one! That is the Baja 342 hatch, but it was also used on the 442, and late model 320's.

The 302 hatch is the same as the rear set of 38 Special hatches, and the 335 is the same as the 275, and 405. The 278 was a new design, but not many were produced.

XT

Dave who made the hatches for the 38 Special and the 302?

[jvcobra]

I could use the trim too, and maybe a whole hatch. It just won't look right next to my brand new XT interior. Come on Dave use your powers to get us some part numbers

[XT-Innovator]

Originally Posted by jvcobra

I could use the trim too, and maybe a whole hatch. It just won't look right next to my brand new XT interior. Come on Dave use your powers to get us some part numbers

Joe,

The Hatches were made by Spartech Marine who is no longer fabricating anything, and the early molded trim was made by the same company that makes the glove box liners. If the molded trim rings accept the screen options, they were made by Bomar Marine, but I don't have access to the part numbers any longer.

XT

[Irishtornado]

Originally Posted by XT-Innovator

Joe,

The Hatches were made by Spartech Marine who is no longer fabricating anything, and the early molded trim was made by the same company that makes the glove box liners. If the molded trim rings accept the screen options, they were made by Bomar Marine, but I don't have access to the part numbers any longer.

XT

Well that means Bomar made my trim pieces..Now I just have to figure out which part# it is.

[jvcobra]

Originally Posted by XT-Innovator

Joe,

The Hatches were made by Spartech Marine who is no longer fabricating anything, and the early molded trim was made by the same company that makes the glove box liners. If the molded trim rings accept the screen options, they were made by Bomar Marine, but I don't have access to the part numbers any longer.

XT

Understand, thanks for trying. I'll just have to clean up what I have. Didn't you say someone bought up the molds from Spartech or was I thinking of another company?

[mittens]

let me know if you figure out how to get one, I need one and a screen

[bluefox70]

So, Has anybody found these anywhere? I lost my screens during a move. Lucky for me, my wife reminds me everytime a mosquito enters the friggin' boat.

[Irishtornado]

I'll get back to working on these trim pieces as soon as I figure out everything else I got going on.