SmurfOnABoat

Anyone know where I can locate a windscreen for a 272/302?

Irishtornado

I'd ask Mike see if he'll trade you for the one off his boat. If not I wish you good luck finding one Scott. I looked for 2yrs and then lucked out and found 2. Spartech is now defunct unless someone picks up they're line so I couldn't even let you use the one I have in a crate for a mold. I'll keep my eyes open.

Irishtornado

There is one on Great Lakes Skipper for a 275, but XT would have to let you know if it would fit a 272 or not.

SmurfOnABoat

I know where there is another one hiding... but someone wont move off it!!! j/p bro!

I will check into it!

Yeah I shot Mike an email, we will see what he says....

XT-Innovator

iTrader: (1)

The fit on the front section would be a little loose, or large to fit tight, but you could fill the void on the inside with a foam tape, or something? The side wings will be around 8" short, and the bottom contour will be too flat. (not enough belly) The side wings are made with just (flat) plex. so you could make wings to fit if you can get matching material?

XT

SmurfOnABoat

They also have one for a 278? Any better of a fit?

Irishtornado

I know where theres one too all wrapped up nice a cozy in a crate.

I also know where there's a complete windshield assembly for a 302 as well...

SmurfOnABoat

Yea Yea just rub it in some more!!!

XT-Innovator

iTrader: (1)

Both models used the same Windshield, but the wings on the 275 (windscreen) used "brackets" that are not needed? Front sections should be the same.

XT

SmurfOnABoat

So the only direct fit for a 272 would be one from a 302?