Full cover and cockpit cover for 232 closed bow
#1
Registered
Thread Starter
Full cover and cockpit cover for 232 closed bow
Hi,
Anyone got a full and or cockpit cover for a 232? Where can I get these at a reasonable price? Thanks
Anyone got a full and or cockpit cover for a 232? Where can I get these at a reasonable price? Thanks
#4
Custom Interiors & More
iTrader: (1)
Brian41 has these for less money than we can make one for.
http://cgi.ebay.com/ebaymotors/Baja-...ssoriesQ5fGear
We can make a custom 302 Mooring Cover in Sunbrella but it will cost $1200.00 in your choice of color.
XT
#5
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
Dave,
Brian41 has these for less money than we can make one for.
http://cgi.ebay.com/ebaymotors/Baja-...ssoriesQ5fGear
We can make a custom 302 Mooring Cover in Sunbrella but it will cost $1200.00 in your choice of color.
XT
Brian41 has these for less money than we can make one for.
http://cgi.ebay.com/ebaymotors/Baja-...ssoriesQ5fGear
We can make a custom 302 Mooring Cover in Sunbrella but it will cost $1200.00 in your choice of color.
XT
#7
Custom Interiors & More
iTrader: (1)
Scott,
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better!
Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested?
XT
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better!
Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested?
XT
#9
Registered
Join Date: Dec 2008
Location: Detroit, MI/Lake Havasu, AZ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Scott,
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better!
Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested?
XT
The 275 deck sits on the same hull design as the 272 (same hull mold) but the deck is a little taller. The 278 is a new hull design that I created at Baja, and is 27' 6" compared to 27' 2" long. Both covers will fit loose, but the 275 would be better!
Note: The cleat holes, and fuel fill access on the Trailering Covers will most likely not line-up. The 275 Shipping cover should fit pretty decent? I have a couple 278 (black) Trailering, and some 275 Shipping covers if interested?
XT
I am looking for the lightweight cover. Almost like a windbreaker.
#10
VIP Member
VIP Member
that would be the shipping cover that is about like a windbreaker they just dont last as long as a trailering cover but you can still trailer with it mine is like a plastic / vinyl outside with a soft felt type material on the inside with 2 rachet straps up front for tightening it and 2 buckle straps that go thru the rear eyelets on the boat for the safety straps