05 baja 38 special pop up cleat
#1
Registered
Thread Starter
Join Date: Dec 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
05 baja 38 special pop up cleat
i am hoping someone can help me i need to replace a pop up fender cleat on my 38 special and i am having one heck of a time locating them. i think they came factory but to describe them they are round and have writing on them stating not for mooring. you push them in and they spring load out, then push them till they bottom out and they stay latched down.they look stainless, they need a 1" to 1.5" hole in the fiberglass, they surface mount with a large nut on the inside of the hull. again any help would be greatly appreciated happy holidays and God bless thanks, alex
#2
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
i am hoping someone can help me i need to replace a pop up fender cleat on my 38 special and i am having one heck of a time locating them. i think they came factory but to describe them they are round and have writing on them stating not for mooring. you push them in and they spring load out, then push them till they bottom out and they stay latched down.they look stainless, they need a 1" to 1.5" hole in the fiberglass, they surface mount with a large nut on the inside of the hull. again any help would be greatly appreciated happy holidays and God bless thanks, alex
http://www.topnotchperformancemarine.com/
#3
Custom Interiors & More
iTrader: (1)
I remember working with the original vendor "Orcas Marine" that later sold to "Southco Marine". It was Baja Marine that had them add the warning text (NOT FOR MOORING) to avoid any liability if someone used them to secure the boat at the dock. Here is the current part number from Southco, but you cannot buy direct.
http://www.southco.com/products/m7-c...0-9033305.html
XT
http://www.southco.com/products/m7-c...0-9033305.html
XT