2002 O/l 25 switch covers??
02-05-2011, 02:07 PM
#1
Registered
Thread Starter
Join Date: Jun 2010
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
2002 O/l 25 switch covers??
ive been searching like crazy to find black switch cover with the markings on them ive called carling they said good luck just have to find someone that has them b/c you cant buy from them
Just curious if anyone has ever found somewhere to buy them
Just curious if anyone has ever found somewhere to buy them
02-05-2011, 02:24 PM
#2
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
http://greatlakesskipper.com/categor...ch-covers.html
Last edited by Irishtornado; 02-05-2011 at 02:24 PM. Reason: Added link
02-05-2011, 07:02 PM
#3
Custom Interiors & More
iTrader: (1)
Carling is very difficult to deal with on this issue. I tried to stock them also, but they want to run 500 at a time per engraved cover. Do the math $5 x 500 x 20-30 different engravings.....ouch! I do have a couple odd ones myself. What do you need?
02-07-2011, 09:01 AM
#6
Registered
I've searched for these 2 or 3 times. Always ended up with 3 or so I coulnt find. Someone already posted it but Great Lakes Skipper has the best supply I ever found. They may have all you need with a single engine. Good Luck.
02-07-2011, 08:11 PM
#8
Charter Member
How do you get the covers off? They looked like a 1 shot deal and I didn't want to break the tabs off.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
02-07-2011, 08:18 PM
#9
Registered
Join Date: Apr 2007
Location: Northern, KY (Cincinnati) Lake St Clair, MI Norris Lake, TN
Posts: 1,130
Likes: 0
Received 2 Likes
on
1 Post
I just replaced all my actuators from the older white ones to the black engraved ones. They make a tool to get them off. I got the tool from digikey.com. Without the tool you MIGHT get one ot two take offs without breaking them. I bought the switch actuators from from greatlakesskipper.com. They didn't have the ACC or HORN ones. I used blank ones for those. You can kind of see them here
Last edited by Baja_342; 02-07-2011 at 09:31 PM.
02-08-2011, 02:21 PM
#10
Registered
Join Date: Jul 2005
Location: Tierra Verde, Fl
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
I need a whole set for twins myself. Looks like Great Lakes stocks about half of them. Then I'll have a mix of new and old. There has to be one company out there that has them all. Who is it?
