454 Mag water intake issue................
#21
Registered
Thread Starter
Join Date: Jan 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Well thank u very much. I just did an impeller with the upper part of the seat in its location, you can imagine how much fun it was. If its easier then the impeller then im in good shape lol.
I guess being that its inside the plastic box makes it look harder to get. Hopefully its cake to get to once the upper seat part is out.
I guess being that its inside the plastic box makes it look harder to get. Hopefully its cake to get to once the upper seat part is out.
#22
Registered
Thread Starter
Join Date: Jan 2011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Where is a good place to shop for that cooler, called a local marina and after and hour on hold guy tells me he cant look it up by part number, says he can order it but wont garantee it will be right part. AMAZING
#23
You may want to just pull the cooler and have it repaired at a radiator shop. OR you can replace all of the system with aftermarket parts. New pump, regulator, cooler.......
In any case the least expensive option is to have your cooler repaired.
Last edited by JasonSmith; 05-10-2011 at 12:09 PM.
#25
#26
Registered
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
yea if i remember i did the new part number that replaced the pump and cooler. it was like 900 bucks? or something.
It is a PAIN IN THE ASS job. but only becasue of locationg. other wise its simple stuff water hose on front and back, the fuel line on front and back and the elcetric plug. thats it.
I did not remove the top of my seat. so its all upside down, or crammed down in the hole sideways.
It is a PAIN IN THE ASS job. but only becasue of locationg. other wise its simple stuff water hose on front and back, the fuel line on front and back and the elcetric plug. thats it.
I did not remove the top of my seat. so its all upside down, or crammed down in the hole sideways.