Baja Hammer Dash Panels/Glovebox Hatch
#1
Registered
Thread Starter
Join Date: Jan 2001
Location: Long Island, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Baja Hammer Dash Panels/Glovebox Hatch
Is there anywhere I can get new dash panels and a new glovebox hatch for a '98 Hammer? All the pieces on mine are all yellow and faded from the sun.
#2
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
You either have to have the custom painted. Or make new panels and have them liquid graphics. It's the process that Baja was using on the newer carbon fiber dash panels. The company that made yours I believe has went under.
#5
Mine were getting dated so I put on carbon fiber vinyl.
I have $100 in vinyl and my time/labor installing it. It is not perfect but it gets the job done and looks good till I find something else.
I have $100 in vinyl and my time/labor installing it. It is not perfect but it gets the job done and looks good till I find something else.
#7
Registered
iTrader: (1)
Join Date: Apr 2010
Location: SE FL
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
This site was recommended to me on a truck website. They also do carbon fiber right on the plastic or metal in some kind of water process I think.
http://www.southerndrawstudios.com/
The guy was very helpful on the phone, but I decided to well enough alone with the truck.
http://www.southerndrawstudios.com/
The guy was very helpful on the phone, but I decided to well enough alone with the truck.