29 outlaw for sale i found......
12-17-2011, 06:47 PM
#1
Registered
Thread Starter
Join Date: Apr 2009
Location: Austin,TX
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
12-17-2011, 09:27 PM
#2
Never Enuff
Gold MemberJoin Date: Apr 2006
Location: Cedar Creek, Texas
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Check with BadIdeaBaja(Jason). He lives up in Dallas. If that's a stock Magnum trailer I can tell you that the wheels and tires are undersized for that boat. It probably has 14" wheels and tires and should have 15". Nice looking boat!
Jay
Jay
12-17-2011, 09:30 PM
#3
Registered
Gold Member
iTrader: (3)
Join Date: Jan 2011
Location: DeRidder, LA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Two problems with that listing. The pics are of 6.2 MPIs. They only make 320hp each. He is stating 380hp motors. He is asking way too much (56K). I would offer him 40k. That boat will be a dog with those motors. Put some 8.2ls or 496 HO Mags and it would be a 78-80mph boat. Get rid of those little trim tabs and put some 280 K-planes on. He probably has Bravo 1 drives with those motors and if you were to upgrade engines you would want to upgrade to XRs as well. No Hydraulic steering on that boat either. I would pass. There are plenty of others out there that size with full hydraulic, K-planes and some decent motors/drives for 55K.
12-17-2011, 10:09 PM
#4
Registered
Join Date: May 2009
Location: North LA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Two problems with that listing. The pics are of 6.2 MPIs. They only make 320hp each. He is stating 380hp motors. He is asking way too much (56K). I would offer him 40k. That boat will be a dog with those motors. Put some 8.2ls or 496 HO Mags and it would be a 78-80mph boat. Get rid of those little trim tabs and put some 280 K-planes on. He probably has Bravo 1 drives with those motors and if you were to upgrade engines you would want to upgrade to XRs as well. No Hydraulic steering on that boat either. I would pass. There are plenty of others out there that size with full hydraulic, K-planes and some decent motors/drives for 55K.
Where in the south with low hours are these boats you speak of for 55k?
12-17-2011, 10:22 PM
#5
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
To upgrade from 6.2's to BB you'd need different everything. Exhaust cutouts would be wrong as well. like said hp is off in ad. Sharp looking boat, but many more properly equipped boats out there for around same money.
12-18-2011, 08:59 AM
#6
Registered
Thread Starter
Join Date: Apr 2009
Location: Austin,TX
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Two problems with that listing. The pics are of 6.2 MPIs. They only make 320hp each. He is stating 380hp motors. He is asking way too much (56K). I would offer him 40k. That boat will be a dog with those motors. Put some 8.2ls or 496 HO Mags and it would be a 78-80mph boat. Get rid of those little trim tabs and put some 280 K-planes on. He probably has Bravo 1 drives with those motors and if you were to upgrade engines you would want to upgrade to XRs as well. No Hydraulic steering on that boat either. I would pass. There are plenty of others out there that size with full hydraulic, K-planes and some decent motors/drives for 55K.
12-18-2011, 09:09 AM
#7
Registered
Thread Starter
Join Date: Apr 2009
Location: Austin,TX
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
http://www.powerboatlistings.com/view/13652
here it is again for 43500....in august. the first one was posted in june...I wonder if you waited another 3 months if it will drop another 10k....
here it is again for 43500....in august. the first one was posted in june...I wonder if you waited another 3 months if it will drop another 10k....
VIP Member
