24 outlaw blower clearance. any pictures?
#1
Registered
Thread Starter
Join Date: Aug 2011
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
24 outlaw blower clearance. any pictures?
Anyone have pictures of a 24 outlaw with any kind of.blower installed? Specifically around the crank pulley. It looks tight as it is. Any info is appreciated.
Thankd
Thankd
#2
VIP Member
iTrader: (1)
I ran a carbed Whipple on my 95. The lower pulley was tight, but it fit. I had to modify the back seat to clear the snout. I have seen other just cut out a small area. I had access to fabricators, so I cut up the seat and had a removeable panel put in so I had full access to front of motor. Unfortunately I have no pics...
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#3
Registered
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: Aug 2011
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
how far forward? Isn't there trim on the side of the boat that it runs into? I don't really have any "adjustment" in my site, I'd have to start cutting stuff up to get it forward at all. wonder if a sidemount or procharger would fit any better?
#8
Registered
Join Date: Aug 2007
Location: Overland Park, KS 87mm Loto
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Join Date: Aug 2007
Location: Overland Park, KS 87mm Loto
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
http://s1266.photobucket.com/user/cd...ry/?view=media
Heres pictures It's kind of a tight fit but i still can slide a cooler behind the front seats.
Heres pictures It's kind of a tight fit but i still can slide a cooler behind the front seats.
Last edited by baditude; 08-14-2013 at 06:13 PM.