Think I found my graphics??
#1
Registered
Thread Starter
Think I found my graphics??
Ok, its a 36ol at pier 57 and I'm digging it! I need to keep my teal for interior. Blue, teal and yellow! Looks good!
Whatcha think? Maybe not running the upper lines all the way up front and change up a little to match the teal graphic lines on my sunpad.
[ATTACH=CONFIG]513170[/ATTACH][ATTACH=CONFIG]513171[/ATTACH][ATTACH=CONFIG]513172[/ATTACH]
Whatcha think? Maybe not running the upper lines all the way up front and change up a little to match the teal graphic lines on my sunpad.
[ATTACH=CONFIG]513170[/ATTACH][ATTACH=CONFIG]513171[/ATTACH][ATTACH=CONFIG]513172[/ATTACH]
Last edited by nailit; 11-25-2013 at 10:29 PM.
#4
Registered
Thread Starter
Not sure, depends what I can scrape together and if we get bonuses in spring :-)
Would like paint but would wrap also.
Mittens, why you think it wouldn't cover?
Would like paint but would wrap also.
Mittens, why you think it wouldn't cover?
#6
Registered
Thread Starter
[ATTACH=CONFIG]513302[/ATTACH]
90% of interior is teal. So would use teal on the side to coordinate. Only pink in interior is where the bolster meets the plastic on hand rail and can barely even see it. It was all replaced at some point (vinyl) and n great shape, so not planning on replacing. Eventually, I could match the hull better when the time comes.
90% of interior is teal. So would use teal on the side to coordinate. Only pink in interior is where the bolster meets the plastic on hand rail and can barely even see it. It was all replaced at some point (vinyl) and n great shape, so not planning on replacing. Eventually, I could match the hull better when the time comes.
Last edited by nailit; 11-28-2013 at 09:32 AM.
#8
Registered
Thread Starter
oh... I think I see what you mean, no... I would cover the whole side if wrapped.
I would change the green in the pic to Teal instead, then I would probably end the teal stripes at the windscreen or hatches instead of running it all the way to the front. Would still have to wrap the whole thing to the bow to cover the existing stripe.
I did think about wrapping just above the existing stripe though... its only 17' to the leading edge of the pink in current graphic but didn't know how ending the wrap there would transition?(white wrap to white gel)... would be cheap though!!
I would change the green in the pic to Teal instead, then I would probably end the teal stripes at the windscreen or hatches instead of running it all the way to the front. Would still have to wrap the whole thing to the bow to cover the existing stripe.
I did think about wrapping just above the existing stripe though... its only 17' to the leading edge of the pink in current graphic but didn't know how ending the wrap there would transition?(white wrap to white gel)... would be cheap though!!
#10
Registered
Thread Starter
Agree, definitely don't like on the wind screen and if it were only the blue above it would look OK, but fading the yellow up too high. Would look better with it below! I would probably swap the green and blue and change the green to teal to match my interior and platform. Then I wouldn't run the blue (current green in pic) to front along rub rail.
Last edited by nailit; 11-29-2013 at 09:55 PM.