Trailer trim on 33 Outlaw
#1
Registered
Thread Starter
Join Date: Apr 2002
Location: Boca Raton, FL
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
Trailer trim on 33 Outlaw
One thing I noticed on the 33 is lack of trailer trim, which my 25 had. I've got the normal trim in throttle, plus 3 switches (P, S Both), which seem to do nothing.
I go to sandbars a lot and really can't get the drives up very high (just the normal full out operating position).
The lakes getting lower this time of year
Thanks ...
I go to sandbars a lot and really can't get the drives up very high (just the normal full out operating position).
The lakes getting lower this time of year
Thanks ...
#4
Charter Member #34
Charter Member
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like
on
1 Post
On my 36, I have a trailer switch just left of the two drive adjustment switches. You have to push all three at the same time. It brings it up a little higher than just the trim button by themselves.
I thought all boats had a trailer mode for the drives?
Good luck
Mark
I thought all boats had a trailer mode for the drives?
Good luck
Mark
#5
Charter Member #1251
Charter Member
Join Date: Mar 2001
Location: wilm. de.
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Not to sound like a smart A$$. Did you push all three at the same time. That how I do mine. Now I'm wondering if only the b button needs to be pressed. I'll try it on Sat.
#6
Registered
my switch is located just to the left of the P&S trim switches. instead of pressing all three, i usually press the trailer trim switch and hit the trim switch on the throttle.
#8
Registered
Thread Starter
Join Date: Apr 2002
Location: Boca Raton, FL
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
Same set up as mine. No mention of trailer, only trim (the switches aren't labeled like yours). I've never tried all 3 at once, just the B. Nothing happens. I'll have to check to see how (if) they're wired. Sounds like there's a couple of different combinations to try.