Anyone want a 23 3blade mirage??
#1
Registered
Thread Starter
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,708
Received 3,020 Likes
on
987 Posts
Anyone want a 23 3blade mirage??
Thise prop is just too small for the new motor. It was just lab finished and is in GREAT shape. 23 pitch 3 blade mirage for a bravo. Had it when I had the 454 in my boat and the boat ran good. Let me know. Oh and I don't really know what it's worth so I'm open to suggestions.......And ummmm, no not 20 bucks or somesh!t like that
Thanks,
Tank
Thanks,
Tank
#2
Platinum Member
Platinum Member
Hey tank,
Who lab-finished it and what were your gains from it?
I alternate between a 23P(stock) and a 25P(labbed) Mirage plus props(depending on load) and I may be interested in your 23 as a replacement for mine and then sell the one I have.
Thanks!
Who lab-finished it and what were your gains from it?
I alternate between a 23P(stock) and a 25P(labbed) Mirage plus props(depending on load) and I may be interested in your 23 as a replacement for mine and then sell the one I have.
Thanks!
#4
Registered
Thread Starter
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,708
Received 3,020 Likes
on
987 Posts
B.D.
A place called Valley Prop Labbed it for me. They are located in Ventura ca. I had a 21 Pitch on the boat when I first got it and stepped up to the 23 pitch because I saw a couple MPH more with it, but lost a little out of the hole. I think it was a little too big for the 454 that used to be in the boat but I liked the better top end. After it was labbed I saw a couple more MPH, but still the RPM's were not high enough. But now that I have 650 HP I'm turning a 4 blade 28 and I still don't think thats enough so I just am not going to need this prop.
97bosshammer,
I don't know...It is in perfect condition....I don't even know what they run new....make me an offer.
Tank
A place called Valley Prop Labbed it for me. They are located in Ventura ca. I had a 21 Pitch on the boat when I first got it and stepped up to the 23 pitch because I saw a couple MPH more with it, but lost a little out of the hole. I think it was a little too big for the 454 that used to be in the boat but I liked the better top end. After it was labbed I saw a couple more MPH, but still the RPM's were not high enough. But now that I have 650 HP I'm turning a 4 blade 28 and I still don't think thats enough so I just am not going to need this prop.
97bosshammer,
I don't know...It is in perfect condition....I don't even know what they run new....make me an offer.
Tank
#6
Registered
Thread Starter
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,708
Received 3,020 Likes
on
987 Posts
thanks dloftis,
so there it is....Who wants this thing, make me an offer....I need to buy a new prop and give Universal Chaos his prop (S) back
so there it is....Who wants this thing, make me an offer....I need to buy a new prop and give Universal Chaos his prop (S) back
Last edited by thisistank; 08-26-2002 at 05:55 PM.