Looking for info about engine builder in NJ - Page 4

MER Performance · 10-30-2009, 08:10 PM

Did everyone else get a PM on this subject? It's funny Air trap made some statements, showed pics and he got comments.
BEWARE & STOLEN he had the right topic!
Here's my comments on the pics.
Crank Balancing: If I had to drill that much material out, I would remove some of the weight off the counter-weights in the lath. 2nd a good crank is designed for the rod length. 3rd if you are going to drill it; at least center the hole and clean the welds up.
Block: NICE

the cam lock plate has the wrong bolts in it.
Harness: I guess the wires got burned in shipping?
Rocker Arms: They look like the same set-up as some guys up in N.C. used that got kicked out of here yrs ago. Ya, I had to go testify for my customer, he got about 1/2 his money back! One of the guys was already dead.
I see some engines for sale over @ Serious.
Who ever PM me your

Pro1 · 11-01-2009, 07:26 PM

Take the comments if you believe are fictitious, print them, they are submissable in court. The judge or mediator will not be amused by a false claim of legal action.

PhantomChaos · 11-01-2009, 11:35 PM

The vendor mentioned on this thread is responding poorly......!!!

Resolve this issue......

Strip Poker 388 · 11-02-2009, 02:13 AM

My momma doesn't like you threating me with a law suit.Your not a friendy person.

Rob

Velocity Vector · 11-02-2009, 11:50 PM

This guy has to be one of Obama's engine Czar's there is no other excuse.

scottw · 11-03-2009, 07:18 PM

I know I don't appreciate getting a threat via PM for my post #17 asking who built that motor.

PhantomChaos · 11-03-2009, 07:30 PM

Quote:

Originally Posted by scottw

I know I don't appreciate getting a threat via PM for my post #17 asking who built that motor.

Me neither.....! This is what I got and my response.

Quote:

Originally Posted by PhantomChaos

Al

Don't send me a message like this. If I were you, and I were interested in fixing this situation....that is what I would be doing. Sounds like you have an attorney friend feeding you some BS as to the actions you can take.

As a business owner on the OSO board, I would recommend that you use extreme care when you post, keep a cool head.....or post nothing. You don't see Bob Teague on this board responding to a problem do you? A problem may pop up here....but he resolves it offlline.

Norton

Quote:

Originally Posted by FEI1975

Dear Offshore only Member 11/02/2009

Please be advised the post made by ***** Performance on 10/30/2009 was not a threat to any members involved in the issue we are having with the member Air Lift.
The reason of the notice was to let the members beware of legal action has been taken and you may be getting involved by having a quote to the post if you took this any other way we apologize.

We would also like all members to know we are a family owned business, have been in business for 35 + years, we still have the same name, we are still located at the same location we are the same owners and we are proud to be able to express this accomplishment.

Thank you in advance
F o n s e Performance

Hannibal41 · 11-03-2009, 09:49 PM

kid apache builds good motors, i have two sets in my boats he cranked on a 1500+ hp motor for me and also built a set of strong SBC for the little boat. Both have major hours with only oil changes!!! Paul knows his stuff!!! and he is good with taking the time to make sure your stuff is right on. I would go to him a good south jersey builder!

Baja555 · 11-05-2009, 01:04 PM

Try D & F performance in Berlin Nj

kidapache · 11-05-2009, 05:15 PM

d&f could not build anything they suck