Dead beat engine builders
#41
Registered
I had my lightnings start to leak on the flange between
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set.
Why the hell would I buy a new set when they cant even fix their own stuff.
All it needed was to reweld the flange and plane it back even.
Pretty bad when they cant even fix their own headers.
Needless to say I took them back and never dealt with them again.
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set.
Why the hell would I buy a new set when they cant even fix their own stuff.
All it needed was to reweld the flange and plane it back even.
Pretty bad when they cant even fix their own headers.
Needless to say I took them back and never dealt with them again.
#42
Registered
I had my lightnings start to leak on the flange between
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set.
Why the hell would I buy a new set when they cant even fix their own stuff.
All it needed was to reweld the flange and plane it back even.
Pretty bad when they cant even fix their own headers.
Needless to say I took them back and never dealt with them again.
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set.
Why the hell would I buy a new set when they cant even fix their own stuff.
All it needed was to reweld the flange and plane it back even.
Pretty bad when they cant even fix their own headers.
Needless to say I took them back and never dealt with them again.
Bummer- !
Uncle Dave
#46
Registered
Join Date: Oct 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
bobby glass says hello
Boyd's Motorworks
224 Elmwood Ave. Ext.
Gloversville, NY 12078
http://www.boydsmotorworks.com/index.html
224 Elmwood Ave. Ext.
Gloversville, NY 12078
http://www.boydsmotorworks.com/index.html
#47
Registered
Thread Starter
Join Date: Sep 2008
Location: Warwick N.Y.
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
#48
I'm still waiting 21 months...wait 22 months day after tomorrow...for an engine rebuild that "he does all the time". I wish I had done my homework and found a reputable builder anywhere other than Cleveland.
Last edited by yschmidt; 06-29-2010 at 10:47 PM. Reason: spelling
#49
VIP Member
VIP Member
Hope ya'll enjoyed the BBQ i always contribute to the eliterate ,OSO boating vendors have no problems taking my $$$$$ BIG Daddy and Larrys would of took it again if i was dumb enuf to give him a blank check. Could'nt be happier since we distanced ourselfs from Larrys Engine & Marine ..and go F@ck yourself
#50
Banned
Congratz ??? NO blown motor here BIG Daddy still working on spacers & props and we're at 50 hours and still going strong .just waiting for next weeks Lake Winnebago run ,could'nt be happier since we distanced ourselvesfrom LARRYS ENGINE & MARINE who built motors with BIG CHIEF HEADS & 34 degrees timing and there now at 28 degrees and LUVIN IT ! we're dayz away from 1 year and were reliable a H@LL just check oil & fill her up with 93 Octane and let her rip . Sorry BIG Daddy no boating Vendors have any trouble taking my Coin $$$
broke Valve ??? cant be BIG Daddy we have Titanium the best $$$ can buy and Mike D. is telling me expect 140/150 hours .See ya on the pond Chalo
broke Valve ??? cant be BIG Daddy we have Titanium the best $$$ can buy and Mike D. is telling me expect 140/150 hours .See ya on the pond Chalo
Last edited by RunninHotRacing163.1; 07-01-2010 at 11:51 AM. Reason: pic download