Engine finally back in
#1
Registered
Thread Starter
Engine finally back in
Taken me longer than I thought but its because I have had so much work so thats
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
#3
Registered
Lookin good! Should be fun! Good luck w/them.
Mine are sitting pretty on carts ready to go. I have some trailer and bottom work going on to complete first. Been waiting on 60 degree temps for fiberglass and gel to cure. We finally have a warm week ahead of us here
Mine are sitting pretty on carts ready to go. I have some trailer and bottom work going on to complete first. Been waiting on 60 degree temps for fiberglass and gel to cure. We finally have a warm week ahead of us here
#5
Registered
iTrader: (2)
Taken me longer than I thought but its because I have had so much work so thats
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
#6
Registered
Thread Starter
I can easily once I get it up and running,just a matter of adjusting the linkage..
I also added some 28" Kplanes for stability.
http://a7.sphotos.ak.fbcdn.net/hphot..._3387992_n.jpg
I also added some 28" Kplanes for stability.
http://a7.sphotos.ak.fbcdn.net/hphot..._3387992_n.jpg
Last edited by HTRDLNCN; 04-06-2011 at 10:24 PM.
#8
Registered
Join Date: Mar 2011
Location: Woodford Vt.
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Taken me longer than I thought but its because I have had so much work so thats
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
good since it means mo money. Taking all next week off to finish it off, just have to plug wiring
back in and hook up the hoses and then do some initial tuning..
Set the linkage up for only 80% max throttle as Im trying to keep it around 600hp
until I can upgrade the drive which is next winters project. Will have to modify rear seat as
well since the snout hits it.
http://a7.sphotos.ak.fbcdn.net/hphot..._4132922_n.jpg
#9
Registered
Thread Starter
getting closer,only thing left to do is slap on the headers, unfortunately ( or fortunately) I have to leave for a gig tommorow so I cant finish it until next week but I can not wait!!
As the outside temp shows its time to hit the water!
As the outside temp shows its time to hit the water!