How fast do you guys run?
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Lk Michigan, Lk Monroe
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
How fast do you guys run?
I've seen the 100mph club thread.
I've read the who has what thread.
Now I want to see how fast fellow checkmate-ers run. What kind of speeds can you guys get in your Checkmate's?
Haven't run with the mods yet but did about 61-ish with stock 7.4L in a 251 hull last year.
I've read the who has what thread.
Now I want to see how fast fellow checkmate-ers run. What kind of speeds can you guys get in your Checkmate's?
Haven't run with the mods yet but did about 61-ish with stock 7.4L in a 251 hull last year.
#3
Registered
Join Date: Feb 2001
Location: Richmond VA
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
229 Maxxum 454, with some mods,heads with rollers, forged pistons, intake, Holley, Mallory ign, cam etc. runs low 70's with a 4 blade 24 Hydro. Decent speed with great reliability.
#9
Registered
Thread Starter
Join Date: Mar 2002
Location: Lk Michigan, Lk Monroe
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
There has been a prop thread floating around, don't know if you've read it, but most Check owners have found a 4-blade hydromotive works like a champ.
#10
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
I am thinking of switching from my 4 blade Bravo 1 to a 4 blade Hydromotive. I have read a few posts here on how well Checkmates' like that wheel. Have any of you guys done this switch? Who has the best deal on Hydromotives these days?