New member, new owner stinger 390
#1
Registered
Thread Starter
Join Date: Feb 2009
Location: Port Washington, WI
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
New member, new owner stinger 390
Hi everyone, I'm new to this forum. I just picked up a 1984 Stinger 390 with fresh 502's and is in near excellent shape except for the dash and some of the wiring. Trying to finish it up before the ice gets off Lake Michagan. Hoping someone might have an old manual laying around they can photo copy. Will post pictures as soon as the boats out of storage.
#4
Registered
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Posting pics should be a rule. What manual do you need? I have Mercruiser from about 1964 to 2001 on CD if that'll help. It's a bit too big to email, but I can mail you a copy if you like?
#5
Registered
Welcome aboard.
Looking foward to seeing pics when the weather turns a bit.
I have some documentation on the Stinger 390X. I will check my files and see if there is anything in particular you need. I think I have a wiring diagram file and also TRS documention, What drives do you have?
Looking foward to seeing pics when the weather turns a bit.
I have some documentation on the Stinger 390X. I will check my files and see if there is anything in particular you need. I think I have a wiring diagram file and also TRS documention, What drives do you have?
#7
Registered
Thread Starter
Join Date: Feb 2009
Location: Port Washington, WI
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I have found most of the mechanical stuff I need still need some information on the TRS outdrives and the wiring escpecially up in the gage area. pulled out the gages and it looks like some of the 12 volt power for accesories on the boat are pulled from the gages.
#9
Registered
Thread Starter
Join Date: Feb 2009
Location: Port Washington, WI
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Ghost Rider thanks they helped, thout I posted this back in March didn't hit the post reply agian thanks. have gone through the electrical and was a complete mess, everthing is up and running and looks like i will be in the water on May 22nd. will post pictures as soon as it's out of storage. at present other boats are a foot away and cannot get any descent shots.
Last edited by divebum; 04-30-2009 at 04:54 AM. Reason: addition