rdoactive

I went from IIs to IIIs on my chris cat.
Speed went up a couple mph. They IIIs are a little longer than the IIs and the X dimension was set with the propshaft about 1" above the bottom, higher than my IIs were at.

MSW

Hey Jeff, could you take a photo of the rear bottom of your boat, I wold like to see were your last step is located.

Thanks,
MSW

ROTAX454

Jeff, Very nice project. Thanks for sharing in your "work in progress". Pics are appreciated. My project is located over on marineperformancetechtalk.com Good luck.

bigo181979

Any updates??? I need a fix man!!!! LOL. Keep the updates and lots of pics coming!

jeff32

things are moving along pretty well!

bigo181979

Jeff@J&J Marine

Sorry it took me so long to post the finished pics guys. Iv been working like a crazy person we are extremly busy. But the boat is done Iv been out on it about 6 or 7 times and it runs great not a single problem. Knock on wood. The boat picked up 2 mph which is fine considering I didnt change anything to the motors just rebuilt them and I added weight with the #3s. Check it out let me know what you think. Thanks, Jeff

Jeff@J&J Marine

A couple more pics

bigo181979

Looks great, you should post up some in progress pictures if you have them.

Also what drives did the boat have originally and what all did you do to swap to 3's?

Jeff@J&J Marine

I origanally had #2 lowers with TRS uppers. But I switched to threes in the winter.