How do you work the toilet?
#11
Registered
Thread Starter
Join Date: Dec 2000
Location: Austin, Texas
Posts: 6,986
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you work the toilet?
Thanks again. It works, but...
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
#12
Registered
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you work the toilet?
Originally Posted by Clay Washington
Thanks again. It works, but...
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
#14
VIP Member
VIP Member
Re: Do do you work the toilet?
Originally Posted by Roger 1
And remember, no matter what. NEVER, NEVER, PUSH THE THIRD BUTTON!!!!!!
Originally Posted by Roger 1
Yeah right! The honor system.....
#15
Registered
Join Date: Mar 2005
Location: Sarasota, FL
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you work the toilet?
I have the same problem - I can't get it to flush fresh water, so I must have either and empty tank (is it the main fresh water tank) or is there a smaller one and if so how do I fill it or check it to see if its holding?
35 Cafe 88
35 Cafe 88
#16
Registered
Re: How do you work the toilet?
Mine had only 1 tank(holding). Draws water direct from the lake to fill & flush. Tank is like 4 gallons and the flush seems like almost 2 gallons.
It don't hold much. My new one has a porta potty , its much easier.
I never want to go through replacing a tank again
But when you do its RDS for the tank and Jabsco parts to rebuild the pump.
It don't hold much. My new one has a porta potty , its much easier.
I never want to go through replacing a tank again
But when you do its RDS for the tank and Jabsco parts to rebuild the pump.
#17
Registered
Join Date: Nov 2004
Location: wolfeboro nh
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you work the toilet?
good luck... i built new tank for mine.. then next year i figured out the tank was to small. (4 gals). took out heavy porcelan head and both pumps glassed in a pad and put a portapotti in its place...
#20
Platinum Member
Platinum Member
Re: How do you work the toilet?
Originally Posted by pm203
Everyone knows, you dont sh!t in a Cigarette.What are you guys thinking?