39' Cigarette Top Gun with Arnesons!
#12
arneson-industries.com
Offshoreonly Advertiser
Thread Starter
Yea, they are fighting the water pressure of 45-50 psi. I try to explain these things but "lost in translation" is more than a movie.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#13
arneson-industries.com
Offshoreonly Advertiser
Thread Starter
With 525's and 32P labbed Maximus it reached 85 mph @ 5200 rpm. It ran 84 mph with a 32P Bravo One at 5,400.
Prior to blowing off the water hoses the boat hit 104 with more to go. Owner is really happy and will be more so when he gets the water pressure under control.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#17
Registered
Join Date: Jan 2006
Location: Royal Oak, MI
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
Before the boat as naturally aspirated 525's and they had Bravo issues. The owner wanted more speed as he had read the 700 package that Cig was building produced 100 mph so he wanted something similar but no Bravo's.
With 525's and 32P labbed Maximus it reached 85 mph @ 5200 rpm. It ran 84 mph with a 32P Bravo One at 5,400.
Prior to blowing off the water hoses the boat hit 104 with more to go. Owner is really happy and will be more so when he gets the water pressure under control.
With 525's and 32P labbed Maximus it reached 85 mph @ 5200 rpm. It ran 84 mph with a 32P Bravo One at 5,400.
Prior to blowing off the water hoses the boat hit 104 with more to go. Owner is really happy and will be more so when he gets the water pressure under control.
Any estimates on what the gain is w/ just the drives, both in speed and fuel savings? Too bad he didn't do this in stages to see the results more clearly.
#18
arneson-industries.com
Offshoreonly Advertiser
Thread Starter
Fuel?
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#19
arneson-industries.com
Offshoreonly Advertiser
Thread Starter
Yep, same kit for all. TRS conversions allow the engine to come rearward like it would for a Bravo install.
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#20
arneson-industries.com
Offshoreonly Advertiser
Thread Starter