Removing Upholstery
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Removing Upholstery
I have a 1994 Cigarette TOP GUN. I want to install a stereo myself. I need to take the seats out and remove the port and starboard side panels that have upholstery. The problem is that there is no screws. How do you remove the panels so I can make new ones?
#2
Registered
they pop off. they are held on by those plastic trees. i have a panel remover tool, but anything that is flat & thin, just insert between the hull & panel & slowly pry apart. keep moving along the line until u can start to use hands.
#3
Registered
Join Date: Jul 2006
Location: Ft. Lauderdale Florida & Tarpon Springs Florida
Posts: 886
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you save and mark the bolts you take off the Bolster stands, the gas tank is right below you and no room for clearance, so you DO NOT want to buy a new bolt that is 1/2 " longer, and they re nt all thesame as some screws into the bulkhead and others have nuts placed into the floor for threads