Flat Deck Bolsters
#13
Registered
Thread Starter
Thanks Jay I have been looking for the pair I had in the seventies and I don't where my wife put them. So in the mean time I am building the shorter fairing. But I am not giving up hope on finding the shoes.
RG.
RG.
Last edited by Rick G; 02-02-2012 at 11:01 AM.
#14
Registered
Thread Starter
Last night I was able to finish the top edge of the front piece of the fairing. Next step is to trim top edge and mate the sides with the front piece, then sand and paint.
RG.
RG.
#15
Registered
Thread Starter
I got the sides glued together and tabed the underside on the fairing corners. Today we do a trial fit and see what adjustments if any need to be made before finishing and paint.
Rick G.
Rick G.
#16
Registered
Thread Starter
Made good progress today set the fairing up on the boat for a trial fit I was pleased it fit within a sixteenth of an inch . Chris I am including a picture of the step I fabricated to access the deck from the cockpit.