stainless marine manifolds
#1
Registered
Thread Starter
stainless marine manifolds
Hi everyone new here bought 4195 franks 35 cafe grt boat and frank was great to deal with . A question. Who has the best price on stainless marine manifolds
#3
Registered
Thread Starter
Yes 3 out of the 4 headers leak,I have seen many a motor wasted on cmi, I put in mrd 540s boat ran 82 but was hitting the rev limter hard,new props needed but heard grt things about stainless marine
#8
JC Performance Engines
Gold Member
You'll need to have them shipped in, so whats the difference if they are from the Midwest or Southeast?
I would post this in the General Forum.
Maybe try someone on this page: http://www.offshoreonly.com/links/browselinks.php?c=9
And Kirk is always claiming he can get good pricing.
[email protected]
I would post this in the General Forum.
Maybe try someone on this page: http://www.offshoreonly.com/links/browselinks.php?c=9
And Kirk is always claiming he can get good pricing.
[email protected]
#10
Registered
I believe CP has the cheepest price, are you thinking the gen 3 manifolds? I am going the gen 3 route. good luck. talk to scott at speed & custom marine , he will tell some good stories on tube headers, short lived. Also talk to jerry at stainless marine ,great guy
Last edited by 575cat; 12-22-2010 at 08:45 AM.