Stellings On Side x Sides
#12
I am not an engine guy so I can’t give you a good answer between the green and the black, performance wise.
I have a straight bottom Cigarette I don’t think that 2 or 3 or 10 horse power will make that big of a difference in my speed.
I know they work well and look better then any stainless marine exhaust manifold. And they will rattle your teeth out of your head if you are into that sort of thing.
I am not knocking the stainless marine exhaust they work well from what I understand.
I have a straight bottom Cigarette I don’t think that 2 or 3 or 10 horse power will make that big of a difference in my speed.
I know they work well and look better then any stainless marine exhaust manifold. And they will rattle your teeth out of your head if you are into that sort of thing.
I am not knocking the stainless marine exhaust they work well from what I understand.
Last edited by dnebo; 01-12-2012 at 08:26 PM.
#13
VIP Member
VIP Member
Good info, thanks darren. I love the looks of the green!
#15
Platinum Member
Platinum Member
of course I forgot to go by the boat this afternoon...but I think mine are the green...
when you look at Darren's they are definitely leaning farther back than mine?
here's a side shot...
Checked the invoice and mine are Gray.....
when you look at Darren's they are definitely leaning farther back than mine?
here's a side shot...
Checked the invoice and mine are Gray.....
Last edited by HUSTLEthis; 01-13-2012 at 10:31 PM.
#18
VIP Member
VIP Member
http://www.offshoreonly.com/forums/c...ank-width.html
My bad.... 34.5" centers. Not sure what it was from the factory with the #3's, but TNT in Miami did the #6 conversion.
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.