Luckydog941

Hi, just finishing restoration on my 1979 Cigarette 20, has 454 with approx 425hp and trs drive. Any prop selection/suggestions would be greatly appreciated

O.C.Barry

iTrader: (5)

I had a 20 with a TRS and a 454/365 it had a 23 pitch 3 blade cleaver and it worked great. With another 60 HP I would start with a 24 pitch 4 blade.

Luckydog941

thankyou, greatly appreciated. I presently have a mirage three blade 23 and now that the engine is tuned in better that is working ok , although top RPM is at 5k and I would like to see another 500.

O.C.Barry

iTrader: (5)

If you go larger in prop size, it will pull the RPM down. I have a 23 Pitch cleaver if you want to try it. It was an identical spare to my old boat and worked great. The valve covers said 365 HP, but it could have been a higher horse engine because it ran really well.

Luckydog941

Hello again Barry, was your old boat a cigarette 20 and did it have the stock TRS drive? Also what's the price? Thanks for all your help, David

O.C.Barry

iTrader: (5)

Yes David, it was a 1979 Cigarette with a stock TRS. I paid $150.00 plus shipping, I'd like to recoup that if you think it's a fair price.

Luckydog941

Barry, sounds like a fair price. Let me do some research and see if that's what I want. What were you turning in RPM and speed? Thanks again for your help, it's greatly appreciated. By the way beautiful boat. David...

O.C.Barry

iTrader: (5)

It's been a while, so numbers evade me. I'd say we were in the 70's. My engine builder was with me, we were surprised how fast we were going, like, this thing is not supposed to be this fast.

Luckydog941

Hi Barry, please call me at 315-646-1413 or email me your number. If no answer leave message with your number. As always thanks for your help. David