It's a sickness!
#11
Registered
With that much setback the jack plate may not be needed. Good planning and measuring to get proper length midsection will be crucial. Good luck and keep us posted.
#12
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
That is the boat from illinois,,when the guy bought it it had a johnson 300 with a ton of work done to it,,dynoed out at 480 hp,had a bobs lower and went 93 mph on gps...then rich sold it and dont know what happened after that..it use toi have a gil bracket on it with a ballast but now i see a fiberglass one with a jack plate..must hav needed that set up for the suzuki motor that was on it so that may explane why the controls were moved...that boat would rock with a 2.5 or a 300x merc..a yamaha vmax with a turbo would also make that boat scoot!
http://www.ebay.com/itm/2007-YAMAHA-...d38abd&vxp=mtr
http://www.ebay.com/itm/2007-YAMAHA-...d38abd&vxp=mtr
Last edited by FIXX; 08-22-2013 at 07:59 PM.